I've ordered some extra paints and think I have narrowed down the colour scheme.
Basecoat of vallejo dark german yellow primer (no. 2)
Followed by zenithal highlight with vallejo german dark yellow (no. 3)
Airbrush a shade with vallejo yellow green (no. 5)
Then paint on the edge highlight vallejo german yellow (no. 4)
And then paint on the shade in vallejo US olive drab (no.1)
I'll then do some more selective shading/glazes with nuln oil and brown ink, and highlight again if necessary
Hopefully that will give a more balanced colour scheme than the one currently.
Number 6 is vallejo camogreen used in the previous colour scheme and mixed with brown so I think the new colours are a good solution, as their all a bit browner.
Let me know what you think!
~M
Thursday, October 18, 2018
Saturday, October 13, 2018
Musing on the ASTRA MILITARUM, Imperial Guard Colour Scheme
Musing on the colour scheme.
I think a darker base would be a good idea, I think I went too heavy on the highlight and low light and the basecoat doesn't really come through. I was hoping I wouldn't have to highlight them with a brush but I think it would be worthwhile doing that and shading them too.
I've bought some vallejo US olive drab, and dark yellow in the hope that I won't have to mix my colours.
If that doesn't work I think I'll just mix a fair bit and put it in dropper bottles so that I have the same colour across the army and don't have to mix it everytime.
~M
I think a darker base would be a good idea, I think I went too heavy on the highlight and low light and the basecoat doesn't really come through. I was hoping I wouldn't have to highlight them with a brush but I think it would be worthwhile doing that and shading them too.
I've bought some vallejo US olive drab, and dark yellow in the hope that I won't have to mix my colours.
If that doesn't work I think I'll just mix a fair bit and put it in dropper bottles so that I have the same colour across the army and don't have to mix it everytime.
~M
Ordo Malleus Inquisitor SARDINIUS MAUL work in progress
I've begun painting SARDINIUS
GW bugman's glow is VERY pink, going to need to tone it down a bit with some brown.
~M
GW bugman's glow is VERY pink, going to need to tone it down a bit with some brown.
~M
Labels:
Blanchitsu,
Inq28,
Inquisitor,
ordo malleus,
wip
Thursday, October 11, 2018
ASTRA MILITARUM, Imperial Guard Colour Scheme
I'm currently figuring out how to paint my imperial guard and would really appreciate some advice.
I want the troups to look like these guys.
https://pin.it/myup2fdmqohcwv
https://pin.it/hkgnq4tzjjzxs3
It's like this horribly beautiful intense brown-green.
Here's progress so far.
I think I'm slowly getting there. Although it is a faff to do because it involves lots of mixing paint.
Basecoat = Airbrush with 3:2 Vallejo camo green:GW steel legion brown
Highlight = Airbrush with 3:2 Vallejo camo green:GW zandri dust
Shade = Airbrush with 1:1:1 Vallejo camo green:GW castellan green:GW
https://www.warhammer-community.com/2016/11/13/citadel-paints/
http://www.abload.de/img/citadelnewpaintrangewpu6p.jpg
I can't really find anything here that gives a similar sort of brown-green, any ideas? Ideally, I'd prefer a vallejo colour given the dropper bottles and that they don't change their paint line every other year...
Instead, I've tried to use the brown ink as a glaze to introduce more of the brown colour from the concept images.
Left figure - no washes
Middle figure - one glaze GW brown ink (old) 1:1 with Vallejo glaze medium, one wash GW nuln oil
RIght figure - two glazes GW brown ink (old) 1:1 with Vallejo glaze medium, one wash GW nuln oil
I have to say I'm very impressed with the nuln oil wash
I prefer the colour on the middle figure the most, but the highlights and low lights still aren't 'popping' like they do in this image. The double glaze just looks a bit messy and too dark.
So I think i need to put an extra highlight and shade in there before I do the wash. I think it's because I did zenithal highlights with an airbrush which flattens the top when viewed from above.
I was thinking edge highlight = 3:2 Vallejo camo green:GW Screaming skull
And I might just use diluted black for the darkest shadows on the shade as it's already pretty dark.
THEN doing the washes, but this might dampen the highlights too much and I don't know if I'll be able to re do them because of the colour shift caused by the glaze...
But, I'd LOVE a simpler option if any one has any ideas.
~M
I want the troups to look like these guys.
https://pin.it/myup2fdmqohcwv
https://pin.it/hkgnq4tzjjzxs3
It's like this horribly beautiful intense brown-green.
Here's progress so far.
I think I'm slowly getting there. Although it is a faff to do because it involves lots of mixing paint.
Basecoat = Airbrush with 3:2 Vallejo camo green:GW steel legion brown
Highlight = Airbrush with 3:2 Vallejo camo green:GW zandri dust
Shade = Airbrush with 1:1:1 Vallejo camo green:GW castellan green:GW
https://www.warhammer-community.com/2016/11/13/citadel-paints/
http://www.abload.de/img/citadelnewpaintrangewpu6p.jpg
I can't really find anything here that gives a similar sort of brown-green, any ideas? Ideally, I'd prefer a vallejo colour given the dropper bottles and that they don't change their paint line every other year...
Instead, I've tried to use the brown ink as a glaze to introduce more of the brown colour from the concept images.
Left figure - no washes
Middle figure - one glaze GW brown ink (old) 1:1 with Vallejo glaze medium, one wash GW nuln oil
RIght figure - two glazes GW brown ink (old) 1:1 with Vallejo glaze medium, one wash GW nuln oil
I have to say I'm very impressed with the nuln oil wash
I prefer the colour on the middle figure the most, but the highlights and low lights still aren't 'popping' like they do in this image. The double glaze just looks a bit messy and too dark.
So I think i need to put an extra highlight and shade in there before I do the wash. I think it's because I did zenithal highlights with an airbrush which flattens the top when viewed from above.
I was thinking edge highlight = 3:2 Vallejo camo green:GW Screaming skull
And I might just use diluted black for the darkest shadows on the shade as it's already pretty dark.
THEN doing the washes, but this might dampen the highlights too much and I don't know if I'll be able to re do them because of the colour shift caused by the glaze...
But, I'd LOVE a simpler option if any one has any ideas.
~M
Monday, October 8, 2018
ARCO-FLAGELLANTS and DAEMONHOST
Saturday, October 6, 2018
Ezreal The Blind - Ecclesiarchy priest and acolytes 40k
Wednesday, October 3, 2018
Inquisitor SARDINIUS MAUL and Interrogator Klauss von Hammarsmerk
SARDINIUS and Klauss
Inquisitor SARDINIUS MAUL
(Not Bane)
Interrogator Klauss von Hammarsmerk
With his brace of bolt pistols "Hilda" and "Greta", which he adores.
~M
Inquisitor SARDINIUS MAUL
(Not Bane)
With his brace of bolt pistols "Hilda" and "Greta", which he adores.
~M
Subscribe to:
Posts (Atom)